MAS-i24/2 is an inline machine for high output requirements with the following features:
- Dual rail conveyor (Max W320 x L500mm)
- 4 individual solder pots
- Can solder for 4 boards at the same time
- Expandable for 6 pots
- Heavy load boards ! Can meet Max 20kg load for each product
- High flexibility - use one or both lanes of the conveyor
- Max board can meet W500mm x L500mm
- Windows 10 system
- Real-time soldering process monitor
| MAS-i24/2 Specifications | ||
|---|---|---|
| Item | MAS-i24/2 | |
| General | ||
| Operating power/Max power | 12KW/36KW | |
| Machine dimension | 4700(L)*2050(W)*1720(H) | |
| Net weight | 2500KG | |
| Power supply | 3PH 380V 50HZ | |
| Air supply | 3-5 bars | |
| Exhausting required | 1300M3/h | |
| PC | Yes | |
| Typical Program Time | 10 Minutes | |
| Conveyor section | ||
| Conveyor lane | Dual Lane | |
| MAX PCB (dual lane model) | W320xL500mm | |
| MAX PCB (single lane model) | W500xL500mm | |
| PCB top clearance | 120mm | |
| PCB bottom clearance | 35mm | |
| Max PCB weight | 20kgs | |
| Selective fluxing table x 1 sets | ||
| Flux Nozzle Type | drop jet fluxer made in Germany | |
| Flux Nozzle Quantity | Standard equip 2 set | |
| Flux Tank Capacity | 1L | |
| Flux Tank Quantity | 2pcs | |
| Flux Nozzle Distance | width adjustable by software | |
| Axes of Motion | X, Y Servo motor | |
| Position Accuracy | +/- 0.05mm | |
| Preheat section x 2 sets | ||
| Preheating method | Top hot air, bottom IR | |
| Temperature range | 25--250c degree | |
| Selective soldering table x 2 sets | ||
| Solder pot type | Standard equipped mechanical pump | |
| Solder pot quantity | 2 individual sets | |
| Solder Pot Capacity | 15kgs/pot x 2pots | |
| Solder Pot distance | Software adjustment | |
| Solder level alarm | standard equipped | |
| Mini Wave Nozzles | Dia 4,6,8,10,12MM | |
| Customized nozzle | Available | |
| Motion Control | All servo control with ball screw | |
| Position Accuracy | +/- 0.05mm | |
| Top preheating | Standard equipped with IR top preheating | |
| (N2) Inertion Management | ||
| N2 Consumption per Nozzle | 1.5m3/H, total 6m3/H (recommend to use SELMATE-8) | |
| Required N2 Purity | >99.99% | |